FrameNotion

Video Ad Specs for Snapchat In-App Ads: Full Guide

Everything you need to format a Snapchat in-app video ad correctly the first time: resolution, aspect ratio, file type, safe zones and a pre-upload checklist.

FrameNotion Team7 min read

If you are setting up a campaign in Snapchat Ads Manager, getting the video ad specs for Snapchat in-app ads right the first time saves you from rejected creative, awkward crops and wasted render time. This guide covers the resolution, aspect ratio, file format, length and sound setup Snapchat expects, plus a short checklist you can run before every upload.

What Counts as a Snapchat In-App Video Ad

Snapchat in-app ads are the video units that appear between Stories, in Discover content, and in the Spotlight feed. They run full-screen, vertically, and are meant to feel native to the rest of the app rather than like a banner dropped into the experience. That's different from Snap Ads that live inside sponsored lenses or filters, which have their own rules.

Because the ad takes over the whole screen, the video ad specs for Snapchat in-app ads are stricter about orientation and safe zones than specs for a horizontal placement like YouTube in-stream or a square Meta feed post. Getting the frame right matters more here than on almost any other placement.

Video Ad Specs for Snapchat In-App Ads

SpecRecommended settingNotes
Aspect ratio9:16 (vertical, full-screen)Matches the phone screen; avoid horizontal or square footage
Resolution1080×1920 pixelsStandard HD vertical; higher resolutions are usually downscaled
File formatMP4 or MOVMP4 with H.264 encoding is the safest default
Frame rate24–30 fps30 fps is the common choice for smooth motion
LengthShort and skippable-friendlyCheck current minimum/maximum in Ads Manager before upload
File sizeAs small as quality allowsCompress to keep load times fast without visible quality loss
SoundSupported, but design for mute tooUse captions so the message lands with sound off

Treat this table as your starting checklist, not the final word. Snapchat updates specific numeric limits inside its own ad manager interface, so confirm the maximum length and file size there right before you upload, especially if it's been a while since your last campaign.

File Format, Resolution and Aspect Ratio in Practice

Export your ad as an MP4 using H.264 video compression and AAC audio compression. This combination plays reliably across devices and keeps file size manageable. MOV files are usually accepted too, but MP4 tends to cause fewer surprises.

For resolution, 1080×1920 is the sweet spot: sharp enough for modern phone screens, light enough to upload quickly. Avoid starting with a square (1:1) or horizontal (16:9) master file and stretching or cropping it afterward. Stretching distorts faces and products; cropping often cuts off text or logos positioned near the edges.

If you're unsure how aspect ratio choices differ across placements, our recommended aspect ratio for Snapchat video ads guide breaks down when 9:16 is non-negotiable and when some flexibility exists.

Safe zones for text and logos

Snapchat overlays its own interface elements — the swipe-up prompt, caption bar, and sometimes a countdown — near the top and bottom of the screen. Keep your logo, key message and call-to-action text inside the middle 80% of the frame vertically. Test your export on an actual phone screen before launch; what looks fine in a desktop preview can get clipped once the native UI sits on top of it.

Length, Captions and Sound Design

Snapchat's audience scrolls fast, so the opening frames carry more weight than almost anything else in the ad. Put your strongest visual or claim in the first couple of seconds rather than building up to it. If you want a deeper breakdown of exactly how long your ad should run and why, see max video length for Snapchat ads, which covers the trade-offs between short, punchy cuts and longer story-driven formats.

On sound: design every ad to work with the audio off. Add burned-in captions synced to the voiceover or dialogue, not just a static end-card line. Many viewers will have sound off by default, and even those with sound on benefit from captions reinforcing the message. Music and sound effects still matter — they shape pacing and emotion for the viewers who do have audio on — but the ad should never depend on sound to make sense.

  • Put your hook — a bold claim, a visual surprise, or the product in action — in the first 1–2 seconds.
  • Caption every spoken line and key on-screen text, even if you're also using voiceover.
  • Keep each caption short enough to read in a glance; break long sentences into two cards.
  • Place your call to action both visually (on screen) and verbally (in voiceover) near the end.
  • End on a clear, simple frame — product, offer, or logo — rather than a fade to black.

A Pre-Upload Checklist

Before you submit a Snapchat in-app ad, run through this list. It takes a few minutes and catches most of the issues that lead to a rejected or re-cropped ad.

  1. Confirm the export is 9:16, 1080×1920, MP4 (H.264) or MOV.
  2. Watch the full ad on a phone, not just a desktop preview, with sound off.
  3. Check that logo, CTA and key text sit clear of the top and bottom safe zones.
  4. Verify captions are present and legible against the background at every point.
  5. Check current length and file-size limits directly in Ads Manager, since these can change.
  6. Have a backup still frame or thumbnail ready in case the platform requests one.

Common Mistakes With Snapchat In-App Ads

The same handful of issues show up again and again when teams move a creative from one platform to another without adjusting it:

  • Reusing a square or horizontal cut from another placement without re-framing the subject.
  • Putting the brand logo or offer text right at the very top or bottom edge, where it gets covered by Snapchat's interface.
  • Front-loading the ad with a slow logo animation instead of the actual hook.
  • Relying on voiceover alone with no captions, which loses the message for sound-off viewers.
  • Uploading an oversized master file and letting Snapchat's own compression make the final quality decision.

How FrameNotion Fits Into a Snapchat Workflow

If you're producing a lot of vertical ads across placements, FrameNotion can shortcut the production step. Paste a product or website link into FrameNotion, and FrameNotion AI writes and renders a 30-second vertical video ad from scratch — 9:16, 1080×1920, 30 fps — built around a hook, problem, benefit, proof and call to action, which lines up with what Snapchat's full-screen in-app placement rewards.

Every ad includes an AI voiceover, a music track cut to the beat, sound effects and word-by-word captions by default, so the sound-off and sound-on design question is handled automatically rather than left as an afterthought. You can also choose music-only or silent versions if that fits your brand better. Once the ad is rendered, you get it as 4:5, 1:1 and 16:9 too, which is useful if the same creative also needs to run on other placements. See example ads to get a feel for the output, or check how it works for the full production flow.

The first ad is free on sign-up, with paid plans starting from the pricing page once you're ready to produce more.

If your campaign spans more than one platform, it's worth comparing specs side by side rather than assuming they match. Snapchat, TikTok, Meta and YouTube each handle aspect ratio, safe zones and length slightly differently. Our guides on video ad specs for TikTok TopView ads and video ad specs for YouTube in-stream ads cover the same level of detail for those placements, so you can build one master file and adapt it correctly for each.

Frequently asked questions

What aspect ratio should a Snapchat in-app ad use?+

Use 9:16 vertical, matching 1080×1920 resolution. Snapchat's in-app placements are full-screen and vertical, so horizontal or square footage will get cropped or padded in ways that hurt the creative.

Does Snapchat accept MOV files or only MP4?+

Both are generally accepted, but MP4 with H.264 video compression and AAC audio compression is the safer default since it plays consistently across devices and compresses efficiently.

How long should a Snapchat in-app video ad be?+

Length limits and recommended durations can shift, so confirm the current minimum and maximum directly in Ads Manager before you upload. For strategy on choosing the right length, see our guide on max video length for Snapchat ads.

Do Snapchat in-app ads need captions if they already have voiceover?+

Yes. Many viewers will have sound off, so burned-in captions synced to the voiceover or on-screen text ensure the message still lands even without audio.

Can I reuse the same video for Snapchat and TikTok?+

You can start from the same vertical master file, but check each platform's specific safe zones, length and file-size rules before submitting, since interface overlays and limits differ between placements.

Try it on your product.

Paste a link — FrameNotion writes a custom 30-second ad.